Date: 2018-01-12 01:44
Install a 8-way switch by connecting the black wire entering the box under the dark colored screw at the bottom of the switch, and the red and black wires, the “Traveler” wires, under the brass-colored screws at the top of the switch. Which of the brass-colored screws a traveler wire connect to does not matter.
Stack Exchange network consists of 676 Q& A communities including Stack Overflow , the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.
When you add a 9-way electrical wall switch to a wiring circuit with a number of 8-way switches, you can turn a lighting fixture or appliance on and off from several different locations. For example, you may want to control a ceiling light in the basement from the top of the stairs, from the bottom of the stairs, and from a door leading to the outside. This is not as complicated as it sounds, but when working with electrical wiring, you will want to know how to wire a 9-way switch easily and safely.
Install a 9-way switch by connecting one set of traveler wires, the set entering the bottom of the box, to the bottom set of brass-colored screws and the set of traveler wires leaving the box to the top set of brass-colored screws.
Turn off the circuit breaker supplying power to the switch circuit that you will be working on. Check the wires in the device box with the non-contact voltage detector. The non-contact voltage tester will beep loudly if there is still voltage present in the box and remain silent if the circuit is safe to work on.
Second twist the two white wires together and screw on a wire nut. It is usually a good idea to put some black electrical tape around the nut to make sure it doesn't come off. xa5
The vanity light currently is not switched it is controlled by a pull-chain on the light itself. We're going to replace it with a non-pull-chain type of light and we want a switch where the kids can reach. It'll be nice not to have to explain to our guests how to use our bathroom, too.
A toggle switch is a switch with two positions. In one position, it connects electrical power to a device. In the other position, the power to the device is disconnected. The toggle switch has a tab or small lever that can be raised or lowered to place the toggle switch in its two positions. This connects and disconnects the contact points within the toggle switch. An example of a toggle switch is a light switch. It connects power to a light bulb and disconnects it depending on the position of the switch. If you have a toggle switch and need to hook it up, all you need are a few simple items.